ToolsUnit ConvertersMass & Force

Power Converter

Convert between power units. Watts, kilowatts, megawatts, horsepower, foot-pounds per second. Essential for pump sizing and equipment power calculations.

Last updated 17 March 2026

About this tool

Convert between power units commonly used in engineering. Useful for pump sizing, equipment specifications, and energy calculations in geotechnical and civil engineering projects.

Revision history

17 March 2026: Initial release

Disclaimer

This tool is provided for educational and general information purposes only. It is not a substitute for professional engineering advice, design or verification.

Diggy and its contributors are not licensed engineering consultants and no results generated by this tool should be used directly for construction, design or safety-critical decisions.

All values and outputs are based on published empirical correlations and should be independently checked and confirmed by a qualified geotechnical engineer before use.

By using this tool, you accept full responsibility for how you interpret and apply the information provided.

Spotted an error? Let us know.

Power

Watts (W)

Kilowatts (kW)

Megawatts (MW)

Horsepower (hp)

Foot-pounds per second (ft·lbf/s)

Common references

1 hp

= 745.7 W

1 kW

≈ 1.34 hp

100 hp

≈ 74.6 kW

1 MW

≈ 1,341 hp

Related tools

Energy ConverterConvert between energy and work units. Joules, kilojoules, megajoules, kilowatt-hours, foot-pounds, BTU. Essential for SPT hammer energy and compaction calculations.Force ConverterConvert between force units. Newtons, kilonewtons, meganewtons, pound-force, kips, ton-force. Essential for pile loads, anchor forces, and structural calculations.Mass ConverterConvert between mass and weight units. Kilograms, grams, pounds, ounces, tonnes, US tons, UK tons. Essential for material quantities and soil sample weights.Torque ConverterConvert between torque and moment units. Newton-metres, foot-pounds, kilonewton-metres, inch-pounds. Essential for bolt torque specifications and structural calculations.